The integrated circuit TL071 is an operational amplifier with JFET at the input, which adds a high input resistance characteristic. The TL071 is found in 8-pin DIL housing, according to the pinout and features shown in the figure below. For more information see the datasheet of this component.
| MIN | MAX | UNIT | |
| VCC+ - VCC– Supply voltage(2) | -18 | 18 | V |
| VID Differential input voltage(3) | –30 | 30 | V |
| VI Input voltage(2) (4) | –15 | 15 | V |
| Duration of output short circuit(5) | Unlimited | ||
| TJ Operating Virtual Junction Temperature | 150 | °C | |
| Case temperature for 60 seconds - FK package | 260 | °C | |
| Lead temperature 1.8 mm (1/16 inch) from case for 10 seconds | 300 | °C | |
| Tstg Storage temperature | –65 | 150 | °C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
(2) (3) Differential voltages are at IN+, with respect to IN?.
(3) (4) The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
(4) (5) The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited.
