Datasheets


N° of component 

1 kHz Oscillator (CB1410E)

This circuit makes use of germanium transistor, but can be mounted with a silicon transistor like the BC558 and even a BC548 if we reverse the polarity of the power. The transformer is a transistor driver. The circuit can be powered by two or four batteries. The circuit is from an old Argentine publication of the 70's.


Circuit Bench

  • IR Receiver (CB875E)

    This circuit can be used in alarms, data links or áudio links using IR radiation. The circuit is...

  • Rumble Filter II (CB953E)

    Rumble is a low frequency noise between 25 and 200 Hz that appears in old turntables, affecting...