24 V Electromechanical Counter Actuator (CB12466E)

Details
Written by: Newton C. Braga

 

With this circuit it is possible to operate a 24 V electromechanical counter from a 12 V supply. We find this circuit in a 1996 documentation. Eventually the transistor can be a BD135 with a small heat radiator, if the current of the meter greater than about 200mA.

 


| Clique na imagem para ampliar |

 

 

  

Buscador de Datasheets


N° de Componente 

Circuit Bench

  • Voltage monitor (CB7947E)

          This circuit was obtained in a 90’s Popular Electronics. The operators admit equivalents such as...

  • CA3080 Trigger (CB25138E)

      Found in a May 1988 Radio Electronics issue, this is a Smitt trigger that requires a symmetrical power...

  • Noise canceler (CB8774E)

           Suggested by the 90s ARRL Handbook edition, this circuit aims to reduce or cancel noise at the...

Latest